This can be loaded in to Live Lite 9 that comes with your Launch Control XL. You don’t see the details of what you’re controlling. But it’s hardly a device that gives a lot of feedback. The Launch Control XL does have a lot of encoders and faders. We have provided an Ableton Live project template that handles the MIDI communication between the two devices. And maybe only control what you need to control in the moments you need to, simply by mapping them real quick in that set. Now you can connect the LC XL to Circuit via your DAW or use a stand-alone USB host. Once you have the 5 templates loaded to your Launch Control XL you no longer need the Editor. You can also use the Editor to back up your templates. If you are using these slots already then you could load them to different numbers. *We have numbered the templates 1 to 5 so you could use User template slots 1 to 5 to load these into for convenience. Repeat the above steps for each template. Select one of the User template locations*.You then need to load the templates one at a time and save them to your unit. Once you have the editor running, connect your Launch Control XL.
Launchkontrol xl download#
To use the templates download the Launch Control XL Editor from the same location, run the installer (Windows) or open the disc image (Mac).
Launchkontrol xl zip#
There are five templates in this zip file: It will also work for Circuit Tracks.ĭownload the LCXL-Circuit Templates.zip file from /downloads, or at the bottom of this article.
It feels like a bit of a missed opportunity that the Send knobs can't be used to control device parameters like the Pan knobs can, but that's certainly not enough of an issue to prevent us giving it our wholehearted recommendation.This article applies to original Circuit and Launch Control XL. The sturdy design makes it ideal for live performance, but it's quite at home as a mixing tool in the studio too. The Launch Control XL is a very well thought-out controller that packs a lot into its relatively tiny surface area. There are also two Send Select buttons for selecting which sends in Live the Send A and Send B knobs control. So, once you've got the hang of how the modifiers work, you can select any device on any track and tweak its parameters without touching your mouse or keyboard.
When held, the Device button also turns the Track Select buttons into Device Select buttons, which cycle through the instruments and effects on the currently selected track. This setup would be much better if the Send A and Send B knobs could also be used for device control, but as it stands, the only way to get access to all of the controls is to create a user template - see Template of Dreams. In the case of EQ Eight, for example, the first bank sees the knobs controlling each band's on/off state, the second band frequency, the third band Gain, and so on.
The Device modifier button switches the Pan knobs into Device mode, under which they control eight of the currently selected plugin's parameters.įurther parameters can then be accessed by holding down the Device button, which turns the Track Control pads into Device Bank selectors, each with its own Pan/Device knob assignments. The Track Select buttons jump the whole controller between banks of eight channels in Live: 1-8, 9-16, 17-24 and so on. Pressing Track Focus on a channel selects that channel's strip in Live, as if you'd clicked on it, while Track Control has three modes of operation, selected using the buttons on the right-hand side of the unit: Mute, Solo and Record Arm - it's all very straightforward.
0 kommentar(er)
